1. Non-residential uses of land or buildings which are required to provide at least forty (40) vehicle parking spaces shall be required to provide on-site bicycle parking spaces in a bicycle parking facility at a rate of one (1) for every ten (10) required vehicle parking spaces.

2. Non-residential uses of land or buildings which are required to provide less than 40 vehicle parking spaces shall be required to provide a minimum of four (4) on-site bicycle parking spaces in a bicycle parking facility.

3. In no event shall any use or building be required to provide more than one hundred (100) bicycle parking spaces.

4. The following uses are exempt from the foregoing bicycle parking requirements:

5. Common or shared bicycle parking facilities may be provided for attached or in-line uses. Bicycle parking in mixed-use commercial centers shall be distributed throughout the project. A reduction of required bicycle parking spaces may be authorized by the Zoning Administrator.

6. A bicycle parking facility is a stationary object, typically a bicycle rack or locker, permanently affixed to the ground or a structure to which the operator can lock the bicycle frame and wheels to the object.

1. Bicycle parking spaces shall be located on a paved surface within one hundred (100) feet of a primary building entrance. Bicycle parking spaces shall not encroach into any required landscaping or pedestrian access areas.

2. A bicycle parking space shall measure two (2) feet by six (6) feet. A pre-manufactured bicycle rack or locker which differs from these dimensions may be approved by the Zoning Administrator.